2020 Yanmar SA Series SA424
Designed for challenging terrain, the YANMAR SA424 tractor has greater ground clearance and provides a rugged, stable platform for the work you need to do. Powered by a famously reliable Yanmar three-cylinder diesel engine, the SA424 delivers a unique combination of horsepower and fuel efficiency. And the new operator platform was designed with you in mind: It’s easier to climb on and off, the seat is more comfortable and every instrument and control is at your fingertips.
Features may include:
Unrivaled versatility- YANMAR outfits the SA424 with a larger, more aggressive tire package, which increases ground clearance and provides more stability over the roughest parts of your property. The design also means you’ll operate with more comfort and confidence. Here’s a quick look at SA424 features to help you get the most work done:
- - Hydrostatic transmission with dual pedals for simplified operation
- - Power takeoff (PTO)
- - Three-point hitch for attachments
- - Lift 1,200 pounds
- - 24 horsepower
- YANMAR designs and builds the major components, engine, front axle, transmission, and final drive to work together.
- - YANMAR-designed front-end loader, with a class-leading lift capacity of 1,200 pounds and a quick-attach system for buckets, forks, and other attachments
- - 60-inch, mid-mount, drive-over mower
- - Dual hydraulic pumps
- - Smooth hydraulic power steering
- - One-touch on/off, electro-hydraulic, independent rear PTO
- 2020
- Yanmar
- SA Series
- SA424
- Compact
- Model: 3TNV80F
- Yanmar
- 24 Engine Horsepower Diesel Tractor
- Gross: 23.9 HP (17.8 kW)
- Maximum: 45.7 ft.lbs (62.0 Nm)
- 3.15 in (80 mm)
- 3.30 in (84 mm)
- Total: 77.2 cu. In. (1.266 L)
- 3
- Water cooled
- Diesel
- Hydraulic Clutch
- at Zero Speed: 21.7 HP (16.2 kW) | 3,200 RPM | Mid Speed/Engine RPM: 2,057/3,200 | Power Take Off (PTO) Power HP (kW): 18.1 HP (13.5 kW)
- 554/3,200 RPM
- 2WD/4WD engagement: Selectable
- Hydrostatic, 2 Range Speeds
- Power: Fully Hydraulic
- Mid: SAE16/32, 15 Splines
- (with R1 Tires): 0-13.1 (0-21.0) mph (kmh)
- (with R1 Tires): 0-6.3 (0-10.0) mph (kmh)
- (with R1 Tires): Reverse Low - 0-4.3 (0-7.0) mph (kmh) / High - 0-9.1 (0-14.7) mph (kmh)
- Wet disc
- Industrial (R4): 23 x 8.50-12 4PR | Turf (R3): 24 x 8.50-14 4PR
- Industrial (R4): 14-17.5 6PR | Turf (R3): 36 x 14.00-15 4PR
- Shaft Size: 35 mm OD, 6 Splines | Type: Independent
- 540 CCA
- Capacity (implement) @ Rated: 3.7 GPM (14.1 L/min) | Capacity (steering) @ Rated RPM: 4.3 GPM (16.1 L/min)
- System: 2,429 psi (16.7 MPa)
- 3-point: Limited Category 1
- (with R4 Tires): 54.1” (1,373 mm)
- (with Folded ROPS, R4 Tires): 71.8" (1,824 mm) | (with R4 Tires): 87.2” (2,215 mm) | (with R4 Tires, Top Of Steering Wheel): 56.7" (1,440 mm)
- (with 3PH and R4 Tires): 105.8” (2,688 mm
- 63.0” (1,600 mm)
- (with R4 Tires): 9.8” (249 mm)
- Minimum: 8.5 ft. (2.6 m)
- Engine: 3.6 qt. (3.4 L) | Front Axle: 0.92 gal. (3.5 L) | Transmission: 4.1 gal. (15.5 L)
- Tank: 6.1 gal. (23.0 L)
- Engine: 3.0 qt. (2.8 L)
- 3-point at 24” (61 cm): (61 cm) 1,209 lbf. (548 kgf)
- (with ROPS, R4 Tires, Full Fluid): 1,830 lbs. (830 kg)
- Hydraulic Control System: Position Control, Open Center | Mid Type: Independent
- A used warranty may be available. Contact dealer for details.
- Thunder Bay, Ontario
- Pre-Owned
- 2020
- Yanmar
- SA Series SA424
- YMJS0026PKKF402324
- Model: 3TNV80F
- 23.9
- 1250
- HST
- Diesel
- Available
- (with R4 Tires): 54.1” (1,373 mm)